Bromic Heating BR-WRCW ON/Off Remote Controller, Putty
The bromic heating on/off wireless controller has the ability to switch power supply to two separate circuits, enabling independent ‘on/off’ control of two single-element electric heaters (2000w, 2300w or 3000w) or one twin-element electric heater (4000w or 6000w)per unit. it will also control up to four tungsten gas or Platinum gas heaters. The unit’s 4-channel remote control transmitter is entirely portable but can be easily mounted with double sided adhesive or with screw provisions within the case. Bh3130010
Product Features
- On/off remote control of two single element electric heaters or one dual element electric heater (up to 6000W total) or up to four tungsten gas or platinum gas heaters
- Control up to two separate circuits remotely
- Remote transmitter is portable or can be mounted on the wall
- Controller is enclosed on a protective box
- 100 foot range of transmitter
Loading...
so they can not easily be hidden I purchased two of these for to control the two dual element 6000 Watt Bromic Heaters that I was mounting. I mounted these in the attic directly above the heaters. The only separating them from the heaters are 2x4s and a little insulation. The remote would not communicate with these controllers(that is me standing directly under the ceiling they are mounted on less than 8 feet away. I had to mount them within line of sight to get these to work with the remote(that defeats the purpose of an RF…
Simplified wiring