![Golden Flame 46,000 BTU [XL-Series] Hammered Silver/Pewter Patio Heater with Wheels (Propane)](https://images-na.ssl-images-amazon.com/images/I/31LUpesnd2L.jpg)
Golden Flame 46,000 BTU [XL-Series] Hammered Silver/Pewter Patio Heater with Wheels (Propane)
** New for Fall 2017** Golden Flame is proud to introduce our all new *XL-Series* 46,000 BTU Commercial Grade Patio Heater Collection exclusively available to the North American market during the Summer of 2017. Our new *XL-Series* Patio Heaters are packed with the very latest advancements in Heater Technology. Every * XL Series* Heater uses our new advanced “Pilotless” Burner System which eliminates the need for the dreaded fuel wasting, standing-pilot of most all other patio heaters! Additionally, by eliminating the standing pilot, no longer are you at the mercy of the wind blowing out the tiny pilot flame, causing the heater to shut down, leaving you out in the cold!! Start-Ups are a breeze with our new *XL-Series* Patio Heaters. We have replaced the traditional Thumb-Aching, Single-Spark, manual push button igniter, and have replaced it with an Easy Press, Easy Start, “Rapid-Spark” ignition system. Our new *XL-Series* Patio Heaters are not only easy to light and easy to operate; they also crank out the HEAT!! An impressive 46,000 BTU’s of heat output makes the *XL-Series*one of the most powerful heaters on the market!! Our powerful burner engine combined with our new patented reflector hood is sure to keep you Warm and Toasty! Our new *XL-Series* Patio Heaters come standard with a Bottom sand resevoir (Sand NOT included) which when filled adds 25 lbs to the Base of the Heater providing much needed stability and safety during windy conditions. In the unlikely event the heater tips over the built-in Tilt-Switch will immediately shut the unit off. Convenient mobility wheels are also included. Our new *XL-Series* Patio Heaters are perfect for the serious outdoor entertainer who truly appreciates quality, ease of operation, and fashionable design. The Stainless steel and handsome powder coat finishes endure extremely well, even in the most challenging weather conditions, while still retaining its beautiful appearance. (Uses 20 lb. LPG BBQ tank – NOT included)
Product Features
- **New 2017 (XL-Series) Feature** Advanced “Pilotless” Burner system (No standing Pilot Flame)
- **New 2017 (XL-Series) Feature** Easy Start “Rapid-Spark” electronic ignition system
- **New 2017 (XL-Series) Feature** Bottom Sand Resevior (Adds 25 lbs to Heater Base) Sand NOT included
- 46,000 BTU’s with SS Burners & Double Mantel Heating Grids
- Attractive Hammered Silver/Pewter (Matte Finish) w/Mobility Wheels
Loading...
2 thumbs up Update we have found it to be sensitive to wind and will easliy go out. Works well with no wind. Puts out good heat but we find it most comfortable to sit around it in a chair, with our feet up on the metal domed propane cover. Temp was 40 degrees outside. Be patient with the blue covering on the deflector. It takes some time to remove. Not difficult just takes time to do. The heater is easy to put together and instructions are easy to read. All of the bolts, nuts and screws are in a plastic covered piece of cardboard and all identified for you. It took us about an hour to assemble…
It saved Friendsgiving! Heated a table for 20. This gives off a lot of heat! Assembly took around 2.5 hours. It was very tippy assembled. The bolts at the bottom that are supposed to be able to optionally connect the 20 lb propane tank were too close together and we had to unscrew and hammer one off to fit the tank in. The ignition button was also never working. It had to be lit with a lighter which was scary. That part was very dissapointing after all of that assembly. At the end of the day when it was lit it was very hot and made outdoor…
Seems like a great heater, but worried about the quality of the materials I’m going to give this product a middle of the road review.I’ll start with the positives. The product is attractive. It works fine (or at least appears to–I haven’t put it completely through it’s paces yet). The assembly procedure was well documented and straightforward for someone familiar with assembling these kinds of things. It took right about the time it said it would and the tools needed were minimal. I would say that it was a well engineered product. I would also say…