Easy to install I had a fan that I took out of my primary home and put into my rental home, but the ceiling is lower in the rental home, so I wanted to have it flush mount to the ceiling. The fan has no brand identifying marks except a label with “E81964 Model 513S-G” on it, which appears to be a generic model number used by several brands. I tried a kit at a big box store, but it didn’t work (screws didn’t align), so I looked on Amazon and found this kit. It appeared a few people had success with…
It looks good, it performs as it should. BUT beware installation with a wirelessly operated fan. The receiver unit for our fan BARELY fit inside the canopy with the wires, wire nuts, etc. After two hours struggling with getting the fan to fit on the screws (securing it to the canopy) while trying to stuff the electrical wires and receiver under the canopy, I finally bought some velcro and used it to stick the receiver unit to the outlet plate, thus getting it out of the way so the fan could…
INFLATION 16′ x 20′ Sand Rectangle Sun Shade Sail Canopy Awning, 95% UV Block Water & Air Permeable, 160GSM Shade Sail for Outdoor Patio Garden Picnic Party Pool
Grand patio 10×13 Feet Patio Gazebo, Outdoor Instant Canopy with Mosquito Netting and Shade Curtains，Sturdy Straight Leg Tent for Backyard & Party & Event
Zeke and Zoey Kids Hanging Bed Canopy for Girls Bed or Boys with Glow in The Dark Stars to fit Full Size Bed. Bed Netting Stars Will Light up Your Child’s own Galaxy. Bedroom Decorative Tent
Sundale Outdoor 10FT Patio Umbrella Table Umbrella Market Umbrella with Aluminum Pole & Auto Tilt, Polyester Canopy Shade for Patio, Garden, Deck, Backyard, Pool, Gray
Tangkula 10′ x 30′ Outdoor Waterproof Gazebo Canopy w/ 6 Removable Sidewalls and 2 Doorways, Heavy Duty Large Tent w/Strong Connection Stakes Ropes for Party Wedding Events Beach BBQ (White)
Loading...
Easy to install I had a fan that I took out of my primary home and put into my rental home, but the ceiling is lower in the rental home, so I wanted to have it flush mount to the ceiling. The fan has no brand identifying marks except a label with “E81964 Model 513S-G” on it, which appears to be a generic model number used by several brands. I tried a kit at a big box store, but it didn’t work (screws didn’t align), so I looked on Amazon and found this kit. It appeared a few people had success with…
It looks good, it performs as it should. BUT beware installation with a wirelessly operated fan. The receiver unit for our fan BARELY fit inside the canopy with the wires, wire nuts, etc. After two hours struggling with getting the fan to fit on the screws (securing it to the canopy) while trying to stuff the electrical wires and receiver under the canopy, I finally bought some velcro and used it to stick the receiver unit to the outlet plate, thus getting it out of the way so the fan could…