NETGEAR WiFi Range Extender EX3700 – Coverage up to 1000 sq.ft. and 15 devices with AC750 Dual Band Wireless Signal Booster & Repeater (up to 750Mbps speed), and Compact Wall Plug Design
NETGEAR AC750 WiFi Range Extender (EX3700-100NAS). System Requirements:2.4 and/or 5GHz 802.11 a/b/g/n/ac wireless router or gateway,Microsoft. Internet Explorer. 8.0, Firefox. 20, Safari. 5.1, Google Chrome 25.0 browsers or higher. Trouble shooting tip- If you cannot get a WiFi connection working, you can use an Ethernet cable to connect your computer to the extender. Data throughput, signal range, and wireless coverage per sq. ft. may vary due to differences in operating environments of wireless networks, including without limitation building materials and wireless interference. Operating temperature:32°to 104°F
Product Features
- EXTENDED WIRELESS COVERAGE: Adds WiFi range coverage up to 1000 square feet, and connects up to 15 devices such as laptops, smartphones, speakers, IP cameras, tablets, IoT devices, and more
- AC750 WIFI SPEED: Provides up to 750Mbps performance using dual band and patented FastLane technology
- UNIVERSAL COMPATIBILITY: Works with any wireless router, gateway, or cable modem with WiFi. The product may not be compatible with routers or gateways with firmware that has been altered, is based on open source programs, or is non standard or outdated
- WIRED ETHERNET PORT: Simply plug in game consoles, streaming players, or other nearby wired devices using the one 10/100M port for maximum speed
- SAFE & SECURE: Supports WEP and WPA/WPA2 wireless security protocols
- SIMPLE TO SETUP: Press the WPS button to connect to your router. Use the NETGEAR WiFi Analyzer app for optimal location
Loading...
Stopped working in 1st year & no support from Netgear After about 9 months of light use, the 2.4g channel has stopped working on all devices (5g works fine). I called Netgear technical support and they only offer complimentary support on this product for 90 days, after which they want you to pay for support. I researched this issue online and found several posts with the same problem. I have done a factory reset, firmware update and confirmed the settings are correct. Netgear does offer a 1-year warranty but they require a return authorization…
It’s good, but realize it’s limitations.. Read on for the good stuff. As a Senior Network Engineer I work around a lot of networking hardware. I am very adept with AP’s, Extenders, WLC’s, and all of that so I knew what to expect with this. I am not sure why people are complaining about setup, it’s ridiculously simple! Note, this is NOT a Mesh-Mode AP/Router, it’s an EXTENDER or AP, which means it will provide a ‘new’ SSID that you can connect to that will bridge to your primary SSID. You should not use this with the same SSID as your router or there could be…
This Extender does work pretty well When it arrived and I took it out of the box I thought it was broken because the manual and directions kind of suck because to do the step by step directions don’t work right. It took some trial and error to figure it out because I thought I had a bad extender out of the box.1st thing you want to do is plug it into an outlet right next to your main router and what that does is let’s them sync up to each other.2nd thing you want to do when the extender power button is…